The “Inspire” 3D Printer was built as my own personal dream and achievement. with the purpose of printing big, fast and with lots of materials, I set out on my journey to build exactly what I wanted. Over the course of 2 years and countless hours of designing, I have finalized my dream and am ready to give my dream to others so they can accomplish their dreams as well. While other printers with the same features can range up to $10,000+. My goal was to make this affordable for the size and capability of this machine.
Here are the technical specs and standard features of the printer:
Core XY configuration
Build area: X:370mm Y:410mm Z:625mm
Max recommended print speed: 150mm/s
Max recommended acceleration: 4000mm/s^2
Max nozzle temperature: 300 degrees Celsius
Max Bed temperature: 100 degrees Celsius
Max Chamber temperature: 60 degrees Celsius
Max Bed Power Draw: 500W
Features:
E3D Revo
Bondtech LGX lite 2.0 extruder
Anycubic Ultrabase build surface
Lerdge 32bit processor board (open source, alter firmware directly on machine)
1200W power supply
BL touch (not currently available)
15mm Linear Rails
High Torque 60mm Nema 17 Core XY motors
High Torque 48mm Nema 17 Z motors
Full Plexiglass enclosure
10mm linear Rods for bed support
Stiff Rubber bed leveling springs
Heavy duty lockable floor saver caster wheels
Chamber fan to cool low temp PLA prints
designated external X,Y stepper drivers
Fully removable quick connect electronics box
spare nozzle holder
pneumatic shock assisted lid
optical endstops
Startup Kit:
The optional start up kit includes:
2kg PLA filament
Microfibre cloth
Alcohol Spray bottle (alcohol not included, 97% isopropyl recommended)
Flushcutters
Tweasers
High quality Allen wrench set
Grease for bearings
1x 0.4mm nozzle
1x 0.6mm nozzle
1× 0.8mm nozzle
1× 1.0mm nozzle
The “Inspire” 3D Printer was built as my own personal dream and achievement. with the purpose of printing big, fast and with lots of materials, I set out on my journey to build exactly what I wanted. Over the course of 2 years and countless hours of designing, I have finalized my dream and am ready to give my dream to others so they can accomplish their dreams as well. While other printers with the same features can range up to $10,000+. My goal was to make this affordable for the size and capability of this machine.
Here are the technical specs and standard features of the printer:
Core XY configuration
Build area: X:370mm Y:410mm Z:625mm
Max recommended print speed: 150mm/s
Max recommended acceleration: 4000mm/s^2
Max nozzle temperature: 300 degrees Celsius
Max Bed temperature: 100 degrees Celsius
Max Chamber temperature: 60 degrees Celsius
Max Bed Power Draw: 500W
Features:
E3D Revo
Bondtech LGX lite 2.0 extruder
Anycubic Ultrabase build surface
Lerdge 32bit processor board (open source, alter firmware directly on machine)
1200W power supply
BL touch (not currently available)
15mm Linear Rails
High Torque 60mm Nema 17 Core XY motors
High Torque 48mm Nema 17 Z motors
Full Plexiglass enclosure
10mm linear Rods for bed support
Stiff Rubber bed leveling springs
Heavy duty lockable floor saver caster wheels
Chamber fan to cool low temp PLA prints
designated external X,Y stepper drivers
Fully removable quick connect electronics box
spare nozzle holder
pneumatic shock assisted lid
optical endstops
Startup Kit:
The optional start up kit includes:
2kg PLA filament
Microfibre cloth
Alcohol Spray bottle (alcohol not included, 97% isopropyl recommended)
Flushcutters
Tweasers
High quality Allen wrench set
Grease for bearings
1x 0.4mm nozzle
1x 0.6mm nozzle
1× 0.8mm nozzle
1× 1.0mm nozzle
